Control Board
MP20 only
MP20S only
4TRM supports not Dial Pulse dialing but DTMF dialing. 8TRK supports DTMF
and Dial Pulse dialing.
3.3.1.1 UNI
UNI has three connectors to mount option boards 4TRM, 2BRM, 4DLM, 4SLM and 4SL2.
For user's purpose, up to three boards can be mounted regardless of the type of the option
board. Module1, Module2, and Module3 are positioned on the basis of the front panel of
UNI, and the interface of the corresponding board is marked on the front panel of UNI.
Align the option board to the top connector (16-pin connector). After that, match the
bottom connector (100-pin connector). Mount two connectors grasping both connectors.
Lock the supporter between the grooves and the top of each option board with screws.
Control Board
MP20S only
© SAMSUNG Electronics Co., Ltd.
Table 3.14 Interface Boards Accommodating Optional Boards
Interface Board
WIM
UNI
4TRM
Figure 3.11 Mounting UNI
Table 3.15 Installable Optional Boards of UNI
Interface Board
UNI
OfficeServ 7200 Installation Manual
Optional Board
WIMD
4TRM, 2BRM, 4DLM, 4SLM, 4SL2
4SLM
Optional Board
4TRM, 2BRM, 4DLM, 4SLM, 4SL2
3-15