Samsung OfficeServ 7200 Installation Manual page 102

CHAPTER 7. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь
отображаться.
7.2.4.2 Receiving alarm information with NMS Server
Set equally with 'Configuring the network parameters using the MMC 830 program' of
'7.2.4.1 Connecting a PC for Programming Using a LAN Port'. If already set, execute
'Configuring the network parameter of NMS Server to send alarm using MMC 830
program'.
Configuring the network parameters using the MMC 830 program
This step configures the network parameters of the OfficeServ 7200.
Consult your network administrator for the network parameter values.
1) Set the IP address of the OfficeServ 7200.
2) Set the subnet mask of the OfficeServ 7200.
3) Set the gateway IP address of the OfficeServ 7200.
4) Reset the board.
Configuring the network parameter of NMS Server to send alarm using MMC
830 program
Set IP address of NMS Server to send alarm in NMS Trap Server field. (Default port
information is 11162.)
7-22
© SAMSUNG Electronics Co., Ltd.