Technical Data Of The Analog Module - Siemens SIMOCODE pro System Manual

D.5.5

Technical data of the analog module

Mounting
Display
• Green "READY" LED
System interfaces
Control circuit
Type of connection:
Inputs:
• Channels
• Parameterizable measuring
ranges
• Cable shielding
• Max. input current
(destruction limit)
• Accuracy
• Input resistance
• Conversion time
• Resolution
• Open circuit detection
• Isolation of the inputs to the
device electronics
Output:
• Channels
• Parameterizable output range
• Cable shielding
• Max. output voltage
• Accuracy
• Max. output load
• Conversion time
• Resolution
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
Snap-on mounting onto 35 mm standard mounting rails or
screw attachment via additional plug-in lugs
• Continuous light: "Ready for operation"
• Flashing: "No connection to basic unit"
For connecting to a basic unit, an additional expansion
module, a current measuring module or a current/voltage
measuring module or the operator panel
2-wire connection
2 (passive)
0/4 mA - 20 mA
Recommended for up to 30 m and outside the switchgear
cabinet; shielding mandatory for cables over 30 m
40 mA
±1 %
50 Ohm
150 ms
12 bit
For measuring range 4 mA - 20 mA
No
1
0/4 mA - 20 mA
Recommended for up to 30 m and outside the switchgear
cabinet; shielding mandatory for cables over 30 m
30 V DC
±1 %
500 Ohm
25 ms
12 bit
Technical data
D-19