Important Information - Siemens SIMOCODE pro System Manual

Motor management and control devices

Hide thumbs Also See for SIMOCODE pro:

Table of Contents

Important information

Scope of application

This manual is applicable to the listed SIMOCODE pro system components.

It contains a description of the components applicable at the time of printing

the manual. We reserve the right to include updated information about new

components or new versions of components in a product information.

• When "SIMOCODE pro" is referred to, both the "SIMOCODE pro C" and the

"SIMOCODE pro V" series are meant.

SIMOCODE pro response tables

Specific responses (deactivated, signaling, warning, tripping) can be

parameterized for various SIMOCODE pro functions, such as overload.

These are always displayed in tabular form:

• "X" = Applicable

• "-" = Not applicable

• Preset values are underlined.

Short description of the responses:

• Tripping: The contactor controls QE* are tripped. A fault message is

generated which is available as a diagnosis via PROFIBUS DP . The fault

message and the device-internal signal remain on until the appropriate

amount of time has elapsed or the cause of the fault has been eliminated and

acknowledged.

• Warning: In addition to the device-internal signal, a warning signal is

generated that is available as a diagnosis via PROFIBUS DP .

• Signaling: Only a device-internal signal is generated, which can be further

processed as required.

• Deactivated: The appropriate function is switched off, no signals are

A delay time can also be set for specific responses.

GWA 4NEB 631 6050-22 DS 03

SIMOCODE pro