Table of Contents
Advertisement
You can always enable and disable the Bridge function
manually.
To enable the Bridge function, touch the sensor (6). The rear cooking
zone display will show "
show "00". The desired heat setting is selected by sliding your finger
across the heat setting selection sensor.
To disable the Bridge function, touch the sensor (6). The respective
cooking zone displays will show "00".
Now both cooking zones can be controlled independently.
Maintain temperature
Your hob is equipped with special programmes that allow you to cook
at the set temperature while consuming the least possible amount of
energy.
Four programmes are available:
Melt 40
•
This is intended for melting butter or a bar of chocolate.
Place the butter or chocolate in a pan at room temperature and then
activate the Melt 40 programme.
Keep Warm 70
•
A programme ideal for heating thick soups or sauces.
Place the pot with the food on the cooking zone and activate the
Keep Warm 70 programme. This programme maintains a
temperature of 70°C.
Simmer 90
•
A programme intended for heating and cooking watery dishes.
26
", while the front cooking zone display will
Advertisement
Table of Contents
