CDA HN6860FR Installation - Use - Maintenance page 36

Problem
Residual heat indicator
extinguished even
though the cooking
zones are hot
Hob cooking surface is
cracked
When the problem is
still not remedied
Induction hob makes
buzzing sound
Induction hob makes
hissing and whistling
sounds
The hob does not work.
The cooking zones will
not operate
36
Possible Cause
A power outage or the
appliance has been discon-
nected
Danger! Immediately unplug the appliance or switch
off the main circuit breaker. Refer the repair to the
nearest service centre.
Immediately unplug the appliance or switch off the main circuit
breaker (fuse). Refer the repair to the nearest service centre.
Important!
You are responsible for operating the appliance correctly and
maintaining its good condition. If you call service as a result of
operating the appliance incorrectly you will be responsible for
the costs incurred even under warranty.
The manufacturer shall not be held liable for damage caused
by failure to follow this manual.
This is normal, the cooling fan is operating to cool down internal
electronics
This is normal. When using several cooking zones at full power,
the hob makes hissing and whistling sounds due to the frequen-
cies used to power the coils
Faulty electronics
Remedy
Residual heat indicator will
be shown again the next
time the appliance is turned
on and off again
Reset the appliance, unplug it
for a few minutes (disconnect
the fuse)