Table of Contents
Advertisement
The twin display will show the previous setting or — if there was no
previous setting — the default setting of 7.4kW shown as "74".
Use
and
selecting the desired setting, touch and hold
confirm.
You will hear a beep and the selected maximum power setting
will flash several times on the display and then the appliance
will turn off. Now your operating induction hob will not exceed
the total maximum power you selected.
If you do not confirm the selected maximum power setting,
your induction hob will turn off and operate with the previously
selected maximum power or with the default power of 7.4kW.
When you select heat setting on individual cooking zones, the Power
Management circuit will ensure that the selected total maximum power
is not exceeded. Any setting that would cause the total maximum
power to be exceeded will be unavailable to the user.
The Power Management circuit may disable a cooking zone if using
it would cause the total maximum power of the appliance to be
exceeded.
12
to select the desired setting: Within 10 seconds of
00
28
37
45
56
74
for 3 seconds to
DEMO
2.8kW
3.7kW
4.5kW
5.6kW
7.4kW
Advertisement
Table of Contents
