Residual Heat Indicators; Temperature Limiter - CDA hc9625 Manual For Installation, Use And Maintenance

Table of Contents

Advertisement

Please note:
If the hob has been turned off whilst the childlock is on, touch then
touch and hold for approximately two seconds to switch off the
childlock.

Residual Heat Indicators:

The hob is equipped with residual heat indicators to warn when any of
the zones are still hot to the touch after cooking.
An "H" will show in the relevant zone display after cooking until the
zone is at a safe temperature to touch.
Please note:
You should avoid touching the zones when the hob is in use, or when
an "H" is showing on the zone display.
In the event of a power cut, the residual heat indicators will not
illuminate after the power supply is restored so extra care must be
taken.

Temperature Limiter:

The hob is equipped with a temperature limiting sensor that adjusts
the power output of the hob if the bottom of the cookware becomes
too hot, preventing damage to the cookware and to the hob itself.
13

Advertisement

Table of Contents
loading

Table of Contents