Table of Contents
Advertisement
the letter "H" or "h", depending on cooking zone temperature (residual
heat indicator).
To deactivate the Stop'n'go function touch the
Cooking zone displays will show the heat setting that was previously
set before activation of the Stop'n'go function.
The Stop'n'go function pauses the Timer countdown
•
The Stop'n'go function does not pause the Minute Minder count-
•
down
Bridge function
The Bridge function allows you to pair two cooking zones into a single
combined cooking zone. The Bridge function is very convenient and
allows you to use casserole dishes.
To use the Bridge function:
• Turn on the hob.
• Place a roasting pan on the right side of the hob, so that it covers
both cooking zones.
• The pan will be automatically detected and the Bridge function will
activate as indicated by the
If you do not select heat setting within 15 seconds the Bridge
function will be deactivated.
• Select the desired heat setting by sliding your finger across the
setting selection sensor field
Now both cooking zones can be controlled as one
sensor again.
symbol.
25
Advertisement
Table of Contents
