Table of Contents
Advertisement
Residual Heat Indicators
The hob is equipped with residual heat indicators to warn when any of
the zones are still hot to the touch after cooking.
An H will flash in the relevant zone display after cooking until the zone
is at a safe temperature to touch.
Please note:
You should avoid touching the zones when the hob is in use, or when
an H is showing on the zone display.
In the event of a power cut, the residual heat indicators will illuminate
after the power supply is restored. However, when there is no power
supply to the hob the residual heat indicators will not work, so extra
care must be taken.
Temperature Limiter
The hob is equipped with a temperature limiting sensor that adjusts
the power output of the hob if the bottom of the cookware becomes
too hot, preventing damage to the cookware and to the hob itself.
Small Object Safety
The hob will not operate if a small object is left on the hob top, for
example a fork. The zone control display will flash to warn there is
something too small on the hob.
Please note:
Several small objects left together may be detected by the hob as a
piece of cookware. In this case, the zone will operate and the objects
may heat up.
14
Advertisement
Table of Contents
