Table of Contents
Advertisement
VHD SERIES FOOD HOLDING & TRANSPORT CABINETS
ELECTRICAL REQUIREMENTS
ELECTRICAL CODES & STANDARDS:
The
cabinet
must
accordance with:
In the United States of America:
1.
State and Local Codes.
2.
National Electrical Code, ANSI/
NFPA-70 (latest edition.) Copies
may be obtained from:
National
Association, 1Batterymarch Park,
Quincy, MA 02269.
1-617-770-3000
In Canada:
1.
Local Codes.
2.
Canadian Electrical Code, CSA
C22.1 (latest edition.)
may be obtained from:
Canadian Standard Association.
www.csa.ca
ELECTRICAL CONNECTIONS:
The cabinet is factory wired for 120 volt
single phase operation. The cabinet is
equipped with an 8 foot cord and a
NEMA
5-15
plug
equipment. Refer to wiring diagrams in
the back of this manual.
The cord and plug supplied is a suitable
durable cord with a molded three-prong
plug, and is provided with a heavy-duty
strain relief.
be
installed
in
The
Fire
Protection
www.nfpa.org
Copies
The
as
standard
equipped with a three-prong plug. It
is imperative that this plug must be
connected into a properly grounded
three-prong
receptacle
is
grounding
electrician.
grounding prong from this plug.
Verify that the power source matches
the Serial Data Plate located on the
lower back corner of the cabinet and
the plug configuration before the
connection is made. (Fig.1)
SERIAL DATA PLATE
4
F-41170 (11-12)
All
cabinets
receptacle.
If
not
the
proper
type,
contact
Do not remove the
(Fig.1)
are
the
an
Advertisement
Table of Contents
