Table of Contents
Advertisement
4-11. Custom switch
⑦
Operations can be assigned to machine head switches ① to ⑥ , hand switch ⑦ and jog dial ⑧ .
The initial values (states) are as described below.
① Machine head switch 1: One touch changeover switch 1
② Machine head switch 2: One touch changeover switch 2
③ Machine head switch 3: One touch changeover switch 3
④ Machine head switch 4: Cancellation/addition switch for automatic reverse feed stitching
⑤ Machine head switch 5: Needle entry alignment switch
⑥ Machine head switch 6: Thread clamp switch
⑦ Hand switch: Reverse feed stitching switch
⑧ Jog dial: Needle up/down correction switch
②
③
④
①
⑧
❶
⑤
⑥
❶ held pressed for three second.
1)
The "mode screen" is displayed.
2)
Select the "13. Hand switch setting".
– 33 –
Advertisement
Table of Contents
