How To Assign A Function To A Key - JUKI PLC-2710V Instruction Manual

9-10-2. How to assign a function to a key

① Displaying the key customization mode list screen
<Mode screen>
② Setting the key customization
<Key customization mode list screen>
❶
❶ held pressed for three second.
1)
The "mode screen" is displayed.
2) Select the "12. Key customization setting".
The "key customization mode list screen" is
displayed.
1) Select "1. Pattern sewing under operator
mode". Then, "key customization assignment
screen (operator mode)" is displayed.
2) Select "2. Pattern sewing under service
mode". Then, "key customization assignment
screen (Maintenance personnel mode)" is
displayed.
3) Select "3. Cycle sewing". Then, "key custom-
ization assignment screen (Cycle mode)" is
displayed.
– 146 –