Preparing the machine
Attaching the foot control
Plug foot control into the machine socket (A) and then into the
main socket (B). The foot control regulates the sewing speed.
The sewing speed can be adjusted by increasing or decreasing
the pressure on the foot control.
B
A
Be sure to turn OFF the power switch before plugging/un-
plugging the controller.
Power/light switch
The power/light switch is on the handwheel side of the machine
in front of the plug socket.
0 = off
I = power and light on
Perform these following steps when you are not using your
sewing machine.
1. Be sure to turn OFF the power switch.
2. Be sure to remove the power plug from the wall outlet.
3. Do not place a thing on the foot controller.
CAUTION:
CAUTION:
8