Copying/Deleting A Condensation Custom - JUKI PLC-2710V Instruction Manual

9-5-4. Copying/deleting a condensation custom

(1) Copying a condensation custom
① Displaying the condensation custom pattern list screen
❷
❶
<Condensation custom pattern list screen>
② Inputting the condensation custom pattern number
❸
<Condensation-custom pattern copy destination
number input screen>
(2) Deleting a condensation custom
❶
<Condensation custom pattern list screen>
❹ ❺
❷
1) Display the "condensation custom pattern list
screen" referring to
condensation custom" p.
2) Press
the selected state.
3) Press
The "condensation custom copy destination
number input screen" is displayed.
1) Enter the number of destination pattern
for copying with numeric keypad ❸ and
2) Press
The created condensation custom pattern is
registered. Then, the current screen is re-
turned to the sewing screen.
In the case the entered number has already
been registered, the prompt message for
overwrite confirmation is displayed.
1) Display the "condensation custom pattern list
screen" referring to
condensation custom" p.
2) Press
deleted in the selected state.
3) Press
The "deletion confirmation screen" is dis-
played.
Press
– 137 –
"9-5-2. Creating a new
133.
❶ of the copy source to put it in
❷ .
❹ .
❺ .
"9-5-2. Creating a new
133.
❶ to put the custom pitch to be
❷ .
to confirm the setting.