Creating A New Custom Pitch - JUKI PLC-2710V Instruction Manual

9-4-2. Creating a new custom pitch

A new custom pitch pattern creation procedure is described as follows using < Figure: Example of the cus-
tom pitch > as an example.
① Selecting the custom pitch setting on the mode screen
<Mode screen>
② Selecting the new custom pitch creating function
❷
<Custom pitch list screen>
③ Inputting a custom pitch pattern number
❸
<New custom pitch pattern creation number input screen>
❹
❺
❶
1) Press
The "mode screen" is displayed.
2) Select the "5. Custom pitch setting".
The "custom pitch list screen" is displayed.
Registered custom pitch pattern(s) is displayed.
Press
The "new custom pitch pattern creation number
input screen" is displayed.
1) Enter the pattern number with numeric keypad
❸ .
An unassigned registration number that is
closest to the entered value in the plus/minus
direction is displayed by pressing
❹ .
2) Press
The "custom pitch edit screen" is displayed.
In the case the entered number has already
been registered, the prompt message for
overwrite confirmation is displayed.
– 128 –
❶ .
❷ .
❺ .