Omron SYSMAC CPM1 Operation Manual page 66

Support Software Capabilities
Group Name
DM Go To Page
(data memory)
Copy
Fill
Print
Hex <—> ASCII
Save DM Data
Retrieve DM Data
K Read DM
Address
K Switch Bank
Number
K Save file
K Retrieve file
I/O Table Write I/O Table
Check I/O Table
Save I/O Table
Retrieve I/O Table
K Clear I/O Table
K Custom I/O
Table SIOU
Print I/O Table
50
Displays the contents of the data memory in the system work area in pages
(units of 160 words). The data can be altered with this function. (C-series PCs
only)
Copies the contents of the DM area of the system work area (data memory
information).
Writes the same data to more than one data word in the system work area data
memory area.
Prints a specified range of DM words.
Specifies the display mode for the data memory contents when the work disk
data memory contents are to be altered. The display mode can be hexadecimal
or ASCII.
Writes the contents of a specified range of system work area data memory to
the data disk.
Retrieves the saved data disk data memory to the system work area DM area.
Used to display DM data from the work disk up to 160 words at a time.
Displayed data can be modified. (CVM1 PCs only)
Used to specify the Expansion DM bank on the work disk. (CVM1 PCs only)
Used to save file data (with an .IOM) extension from the work disk to a data
disk. (CVM1 PCs only)
Use to retrieve file data (with an .IOM extension) from a data disk to the work
disk. (CVM1 PCs only)
Edits the I/O table in the system work area.
Checks the contents of the I/O table in the system work area.
Writes the I/O table in the system work area to a data disk.
Retrieves the I/O table data stored on a data disk to the system work area.
Used to delete the I/O table from the work disk. (CVM1 PCs only)
Used to specify CPU Bus Unit classifications. (CVM1 PCs only)
Prints an I/O table list. (C-series PCs only)
Description
Section 4-1