Omron SYSMAC CPM1 Operation Manual page 48

Installing the CPM1
DIN Track Installation
32
The CPM1 can be installed on a 35-mm DIN Track.
End Plates
(PFP-M)
Installation
Lower the CPM1 so that the notch on the back of the PC catches the top of the
DIN Track. Push the PC forward until the lock snaps into place.
Removal
Pry the lock down with a standard screwdriver and pivot the PC upward to
remove it.
DIN Track
PFP-100N (1 m)
PFP-50N (50 cm)
PFP-100N2 (1 m)
Screwdriver
Section 3-3