Pre-Installation; Features; Packaging List; Ratings - Superior Fireplaces DRI2000TEN Series Installation And Operation Manual

Table of Contents

Advertisement

PRE-INSTALLATION

Features

Installation Options
.25
Manufactured (Mobile) Home
.25
Natural Gas Or Propane (LP)
.25
Bedrooms
Electrical
The standard blower motor requires 120 Volts AC for operation. The
fireplace is not dependent on the blower to operate.
WARNING: Electrical Grounding Instructions - This appliance is equipped
with a three-prong (grounding) plug for your protection against shock
hazard and should be plugged directly into a al electrical 120 Volt
power is required to operate the blower system of this appliance and
recommended to operate the burner system. This appliance is equipped
with a battery backup system in case of a power outage (see Battery
Backup on Page 23 for more information).
Fuel
THIS APPLIANCE IS EQUIPPED FOR NATURAL GAS.
This appliance is equipped with an orifice sized for operation with
natural gas.
For conversion to LP/propane gas, see instructions provided with
the appliance.
Orifices and instructions necessary for LP/propane conversion are
provided in the gas conversion kit (see Pages 35-36 for ordering
information).
This appliance comes from the factory equipped to burn natural gas at a
specified elevation. Only IHP conversion kits can be used to convert from
NG to LP or LP to NG. Contact your IHP dealer for details.

RATINGS

Max/Min Input BTUh 0-2,000 Feet (0-610 M)u
Manifold Pressure (IN. WC)
Min. Inlet Pressure (IN. WC)
AFUE Efficiency
P4 Efficiency v
Orifice (DMS) 0-2,000 Feet (0-610 M)u
uUnit factory equipped for 0-2000 FT/0-610 M, In Canada 0-4500 FT/0-1370 M
vComplies with CSA P.4.1-2015 "Testing Method for Measuring Annual Fireplace Efficiency.
Electrical Rating: 120 VAC, 60 HZ, Less Than 2 Amps
12

Packaging List

Insert Body Packaging List
1 Insert Body
1 Power Cord
1 Log Set
1 Bag of Embers
1 Literature Package (installation and operation manual, warning labels,
and hardware kit*).
*Hardware kit contents:
4 Threaded 1/4-20 x 2.5" appliance leveling bolts
2 #8 x 3/8" Phillips screws
4 #8 Washers (Full Front Facade panel installation)
4 8-32 Nuts (Full Front Facade panel installation)
Full Front Facade Kits - One Required
3 Sided (See ACCESSORIES page for size options)
4 Sided - Trimmable (See ACCESSORIES page for size options)
DRI2027
NATURAL GAS
LP GAS
25,000 / 14,000
22,500 / 13,300
3.5 / 1.2
10.0 / 3.2
5.0
78%
73%
#41 (.096")
#54 (.055")
NATURAL GAS
28,000 / 16,000
3.5 / 1.2
10.5
5.0
75%
70%
73%
57%
#38 (.101")
DRI2032
LP GAS
25,000 / 14,000
10.0 / 3.2
10.5
67%
61%
#53 (.0595")
Based on CSA P.4.1-2015

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dri2027tenDri2032ten

Table of Contents