Replace Cisco Ncs 1001 Components; Insert Power Supply - Cisco NCS 1001 Hardware Installation Manual

Replace Cisco NCS 1001 Components

This chapter describes the procedures to replace Cisco NCS 1001 components.
•
•
•
•
•
•
•
•
•
•
•
•

Insert Power Supply

Use this procedure to insert the power supply units.
Insert Power Supply, on page 41
Remove Power Supply, on page 42
Insert Fans, on page 43
Remove Fans, on page 44
Insert Control Card, on page 44
Remove Control Card, on page 46
Remove and Replace SSD, on page 48
Insert Optical Modules, on page 49
Remove Optical Modules, on page 50
Filler Modules, on page 51
Cable Routing, on page 52
Wipe Data in Disk Using Secure Erase, on page 52
4
C H A P T E R
Hardware Installation Guide for Cisco NCS 1001
41