Leds In Cisco Ncs 1001 - Cisco NCS 1001 Hardware Installation Manual

Cisco NCS 1001 Overview
Product ID
ONS-SI-GE-SX=
ONS-SI-GE-ZX=
ONS-SC-Z3-1510=
ONS-SC-Z3-1610=

LEDs in Cisco NCS 1001

LED
SYS
BCN
SFP
PSU and FAN
OIR
Description
SFP 1000BASE-SX Gigabit Ethernet, 850 nm, MM, I-TEMP
SFP 1000BASE-ZX Gigabit Ethernet, 1550 nm, SM, I-Temp
SFP OC-48/STM-16/GE, CWDM, 1510 nm
SFP OC-48/STM-16/GE, CWDM, 1610 nm
State
Green
Yellow
Off
Blue
Off
Green
Yellow
Off
Green
Red
Off
Amber Blinking
Amber Solid
Hardware Installation Guide for Cisco NCS 1001
LEDs in Cisco NCS 1001
Description
The unit is operating correctly.
The unit has one or more errors detected.
Power is not applied to the unit.
The unit needs attention.
The unit does not need attention.
The SFP link is up.
The link is down, active alarms are present
on this port, or a hardware failure has
occurred.
The port is not provisioned by the software,
the optics module is missing, or the port does
not have power.
The unit is operating correctly.
The unit has one or more errors detected.
The control card is not present or not properly
inserted.
The software is not operating correctly as the
control card may not be correctly inserted.
The control card, BIOS, and software are
functional.
13