Cisco NCS 1001 Hardware Installation Manual page 29

Install Cisco NCS 1001
2
3
Note
Figure 23: Mating for the Four Post 19" Rack
1
2
Step 4 Integrate the slider to the four post 23" rack.
Right side four-post slide assembly
Slider fixing screws (part number - 48-101524-01)
Ensure that the edge surface of the 19" rack and the inner surface of the sliding rail are properly
mated while assembling the sliding rail.
Edge surface of the rack
Inner surface of the sliding bracket
Install Four Post Slider into EIA/ANSI Rack
Hardware Installation Guide for Cisco NCS 1001
25