Cisco NCS 1001 Hardware Installation Manual page 6

Hide thumbs Also See for NCS 1001:

Table of Contents

Cisco NCS 1001 Overview

Caution

Each optical module must be inserted in a slot only when the module in the adjacent slot is completely inserted

and seated or the adjacent slot is empty. If an optical module is inserted in a slot without seating the adjacent

module, the ejector might interfere with the adjacent module.

Caution

The empty slots must be inserted with the filler optical modules or filler PSUs as appropriate to guarantee

safety and system cooling compliance. See

Cisco NCS 1001 Rear View, on page 3

Figure 1: Cisco NCS 1001 Front View

The slot numbers are also specified on the front panel label.

Hardware Installation Guide for Cisco NCS 1001

to identify the slots for optical modules and PSUs respectively.

Optical Module Slot 1

Optical Module Slot 2

Optical Module Slot 3

Figure 1: Cisco NCS 1001 Front View, on page 2

Cisco NCS 1001 Overview

and

Figure 3:

Table of Contents