Safety Labels - Cisco NCS 1001 Hardware Installation Manual

Safety Labels

7
Both the power supply modules shall be AC/DC or DC/DC. Mixed configuration is not allowed.
Benefits
NCS 1001 provides the following benefits.
• Up to 23dBm output power to allow for +3dBm per channel fiber launch power and maximum optical
• Switchable gain pre-amplifier up to 34db.
• Embedded Optical Channel Monitoring (OCM) module to monitor per channel power at all the input
• Integrated pluggable optics based OSC and OTDR support.
• OSC supports user data channel transport as well as remote node management.
• Supports 96 channels of C-Band in 1 RU.
• Supports flex grid on OCM module.
Physical Characteristics
• Width: 17.44" (442.9 mm)
• Depth: 23.64" (600.5 mm)
• Height: 1 RU
• Weight without power supply unit: 8.2 kg
• Weight with two power supply units: 10.5 kg
• Weight of AC PSU: 1.162 kg
• Weight of Fan: 78 gms
• Weight of control card: 1.5 kg
Safety Labels
Cisco NCS 1000 Series chassis is classified as Hazard Level 1M as per IEC 60825-2 and Laser Class 1M as
per IEC 60825-1, since it includes pluggable optical modules Class 1 or Class 1M.
The Class 1/1M Laser Product label is shown in the following figure:
Hardware Installation Guide for Cisco NCS 1001
4
600W AC/DC or DC/DC redundant power supply module (PSU 0)
performance for high baud rate and higher order modulation format transponders.
and output ports.
Cisco NCS 1001 Overview