Cisco NCS 1001 Hardware Installation Manual page 25

Install Cisco NCS 1001
Figure 17: Fixing L Bracket
1
2
3
Step 3 Fix the Grounding extender to the chassis with the screws (48-1142-01) and tighten them to a torque value
of 2.5 - 3.4 N-m (22.0 - 30.0 in-lbs).
Note
Figure 18: Grounding Extender
The counter sink surface must face outside as per the figure.
1
Right L Bracket
Screws for L Bracket (part number - 48-2406-01)
Left L Bracket
The grounding extender must be assembled before installing NCS 1001 into the rack.
Grounding extender
Install NCS 1001-K9 into EIA/ANSI Rack
Hardware Installation Guide for Cisco NCS 1001
21