Cisco Ncs 1002 Product Overview; Command Modes - Cisco NCS 1002 System Setup And Software Installation Manual

Cisco NCS 1002 Product Overview

The Cisco Network Convergence System (NCS) 1002 is a 2 RU system that delivers fully programmable,
high-bandwidth capacity (up to 250 Gbps) wavelengths over distances exceeding 3000 km using existing
fiber. Powered by the industry-leading Cisco IOS XR operating system, Cisco NCS 1002 offers robust functions
such as third party application hosting, machine-to-machine interface, telemetry and flexible package delivery.
NCS 1002 delivers the following benefits:
• Supports up to 2 Tbps capacity
• Transports 100, 200, or 250Gbps per wavelength on the same platform through software provisioning
• Transports 10 GE, 40 GE, and 100 GE on the same platform through software provisioning
• Supports grid-less tuning for flex-grid dense wavelength-division multiplexing (DWDM)
• Supports different modulation formats (PM-QPSK or PM-16QAM)
• Supports 7% or 20% Soft Decision (SD) FEC for maximum optical performance
• Allows for automated installation, configuration and monitoring
• Supports machine-to-machine (M2M) APIs based on YANG models for ease of configuration
• Supports a telemetry agent for a pub-sub model of device monitoring
•

Command Modes

The Cisco NCS 1002 system runs on the Cisco IOS XR operating system. This table lists command modes.
Command Mode
XR execution mode
Command Modes, on page 1
C H A P T E R
Description
Displays and monitors the operational state in XR mode.
Example:
RP/0/RP0/CPU0:ios#
System Setup and Software Installation Guide for Cisco NCS 1002
1
1