Fan - HP EliteDesk 705 G3 Desktop Mini Maintenance And Service Manual

Fan

The fan sits between the fan sink and the front of the computer.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Disconnect the fan cable from the system board.
4. Lift the tab on the outer edge of the fan and rotate the fan upward, and then lift the fan out of the
chassis.
To install the fan, reverse the removal procedure.
When installing the fan, be sure to insert the tabs on the side of the fan into the slots in the side of the
computer chassis and the heat sink.
(Preparation for disassembly on page
(Access panel on page 19).
18).
Fan 35