Table of Contents
Advertisement
IMPORTANT:
improperly removed or installed, the keyboard may not function properly.
Cleaning under a key may be done with a swab moistened with isopropyl alcohol and squeezed out. Be
●
careful not to wipe away lubricants necessary for proper key functions. Use tweezers to remove any fibers
or dirt in confined areas. Allow the parts to air dry before reassembly.
Cleaning the monitor
Wipe the monitor screen with a clean cloth moistened with water or with a towelette designed for cleaning
●
monitors. Do not use sprays or aerosols directly on the screen; the liquid may seep into the housing and
damage a component. Never use solvents or flammable liquids on the monitor.
To clean the monitor body follow the procedures in
●
Cleaning the mouse
Before cleaning the mouse, ensure that the power to the computer is turned off.
●
Clean the mouse ball by first removing the retaining plate and the ball from the housing. Pull out any debris
from the ball socket and wipe the ball with a clean, dry cloth before reassembly.
To clean the mouse body, follow the procedures in
●
Service considerations
Keep the following considerations in mind during the disassembly and assembly of the computer.
Power supply fan
The power supply fan is a variable-speed fan based on the temperature in the power supply.
IMPORTANT:
the computer is in "Standby," "Suspend," or "Off" modes.
You must disconnect the power cord from the power source before opening the computer to prevent system
board or component damage.
Tools and software requirements
To service the computer, you need the following:
Torx T-15 screwdriver
●
Flat-blade screwdriver (may sometimes be used in place of the Torx screwdriver)
●
Phillips #1 screwdriver
●
Never remove a wide leveled key (like the space bar) from the keyboard. If these keys are
The cooling fan is always on when the computer is in the "On" mode. The cooling fan is off when
Cleaning the computer case on page
Cleaning the computer case on page
12.
12.
Service considerations
13
Advertisement
Table of Contents
