Thermal Sensor - HP EliteDesk 705 G3 Desktop Mini Maintenance And Service Manual

Thermal sensor

A thermal sensor installs at the front of the computer near the speaker. Adhesive secures the sensor to the
chassis that houses the speaker.
To remove the thermal sensor:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the hard drive
4. Remove the drive cage
5. Disconnect the thermal module from the system board.
6. Remove the sensor from the computer.
To install the thermal sensor, reverse the removal procedures.
34 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Preparation for disassembly on page
(Access panel on page
(Hard drive on page 23).
(Drive cage on page 25).
19).
18).