Installation Of The Drop Gate Identification And Signaling Set; Figure 29: Drop Gate Identification And Signaling Set; Figure 30: Schematic Of Drop Gate Wiring To Identification And Signaling Set - Fluke TIP900 Operating Instructions Manual

Installation

4.5 Installation of the drop gate identification and signaling set

The drop gate identification and signaling set for the adaptation to process interfaces and intersystem
network communication is a separately shipped and prewired component composition. It consists of a
DIN-top hat rail, equipped with the following components:

Industrial Fieldbus coupler (e.g. WAGO 750-352)

Industrial 16-channel digital input module 24VDC (e.g WAGO 750-1406)

Prewired Terminal block

Industrial Power Supply 24V, 1.5A (e.g. WAGO 787-1002)

Figure 30: Schematic of drop gate wiring to identification and signaling set

34

Figure 29: Drop gate identification and signaling set

Rev. E1 Feb 2016
TIP900