Table of Contents
Advertisement
Operation
Resolution:
Frequency:
Global Error Min Deck 1:
Global Error Max Deck 1:
●
●
●
●
Global Error Min Deck X:
Global Error Max Deck X:
44
The resolution snapshots will be taken for a single line scan. The
resolution per line scan is pre-settable in the Edit Recipe function in
steps of 256, 512, 1024 pixel/line.
It's the frequency, which indicates how many lines will be scanned
per second in the given resolution of previous field. Scan frequency
and scan resolution are in a direct dependence of each other. The
following frequency values are allowed:
Resolution = 256 pixel/line Frequency in range 81 – 150Hz
Resolution = 512 pixel/line Frequency in range 41 – 80Hz
Resolution = 1024 pixel/line Frequency in range 20 – 40Hz
-- Defect Detection parameters --
The minimum allowed global error (average temperature deviation)
for all parallel scanned wallboards in Deck1. This is the lower
threshold of all parallel scanned gypsum wallboard average
temperatures per dryer deck in relation to reference wallboard
average temperatures. If the average temperature of the parallel
scanned boards per dryer deck is below the average temperature
of the reference boards minus the "Global Error Min Deck 1"
threshold, a global error for dryer Deck 1 will be indicated.
The maximum allowed global error (average temperature deviation)
for all parallel scanned wallboards in Deck1. This is the upper
threshold of all parallel scanned gypsum wallboard average
temperatures per dryer deck in relation to reference wallboard
average temperatures. If the average temperature of the parallel
scanned boards per dryer deck is above the average temperature
of the reference boards plus the "Global Error Max Deck 1"
threshold, a global error for dryer Deck 1 will be indicated.
In dependence of the customer specific kiln (dryer), the maximum
deck number can vary up to 16 decks and is limited in the SW.
Please see the description of "Global Error Min Deck X" under the
previous description for "Global Error Min Deck 1".
In dependence of the customer specific kiln (dryer), the maximum
deck number can vary up to 16 decks and is limited in the SW.
Please see the description of "Global Error Max Deck X" under the
previous description for "Global Error Max Deck 1".
Rev. E1 Feb 2016
TIP900
Advertisement
Table of Contents
