The HW components are:
Industrial Touch Panel PC (21.5") for control, analysis and archiving, equipped with:
Touch sensitive panel PC module with two separate network channels
Power supply 100 – 240VAC, to power the PC module, see Figure 5 (T3)
Industrial Power Supply (24VDC, 2.5A, e.g. WAGO 787-1012), to power integrated
Digital-Output modules and network switch, see Figure 5 (T1)
Industrial Digital-Output module (4 * Relay Output, e.g. WAGO 750-513)
Industrial Digital-Output module (16 * 24VDC-Output, e.g WAGO 750-1504)
Industrial Fieldbus coupler (e.g. WAGO 750-352), see Figure 5 (T2)
Industrial Terminal block, labeled for signal connection, see Figure 5 (X1, X2)
Industrial 5-channel network switch (e.g. WAGO 852-111), see Figure 5 (X3)
Figure 5: Rear view into the equipped Industrial Touch-Panel PC
TIP900
Figure 4: Front view of the Industrial Touch-Panel PC
Rev. E1 Feb 2016
Product Description
13