Table of Contents
Advertisement
Accessories
8. Accessories
Accessories include items that may be ordered at any time and added on-site.
8.1 TIP900-PCST (Pedestal for Touch-Panel PC)
The accessory item can be ordered at any time or in association with the TIP900SYS order, if this is the
preferred Touch-Panel PC mounting method. Please refer to Figure 6: Options to fix the Industrial
Touch-Panel PC and chapter 4.6.1 for detailed installation dimensions.
8.2 TIP900-PCAF (Swiveling Supporting Arm for Touch-Panel PC)
The accessory item can be ordered at any time or in association with the TIP900SYS order, if this is the
preferred Touch-Panel PC mounting method. Please refer to Figure 6: Options to fix the Industrial
Touch-Panel PC and chapter 4.6.1 for detailed installation dimensions.
8.3 TIP900-HSFIC4 (High Speed Fiber Optic / RJ45 Converter Set)
The high-speed fiber optic to LAN/RJ45 converter set consists of two (2) converters, a 2m long standard
Cat5e LAN/Ethernet cable and a 2m long fiber optic cable with SC-type connectors. To bridge distances
> 80m (262 ft.) by a fiber optic link, it is under the customers responsibility to provide and establish such
link. Please see Figure 1: Example of fiber optical link to overcome large network distances and chapter
3.1.6 for detailed information regarding the converter, the optical connector and fiber specification.
8.4 TIP900-ETHLTCB (7.5m, 25ft Ethernet Cable, Cat5, 70°C)
The 4-conductor shielded connecting cable (7.5m, Cat5, 70°C) is used to link the Temperature
Compensation Connection Box to a LAN/Ethernet device. It is a standardized cable, equipped with a
M12 4-pin connector type, D-coded, suited for industrial Ethernet with IP67 protection rate and a screw
retention feature on one side and a RJ45 connector type on the counter side.
8.5 TIP900-ETHLTCB15 (15m, 49ft Ethernet Cable, Cat5, 70°C)
The 4-conductor shielded connecting cable (15m, Cat5, 70°C) is used to link the Temperature
Compensation Connection Box to a LAN/Ethernet device. It is a standardized cable, equipped with a
M12 4-pin connector type, D-coded, suited for industrial Ethernet with IP67 protection rate and a screw
retention feature on one side and a RJ45 connector type on the counter side.
8.6 TIP900-ETHLTCB30 (30m, 98ft Ethernet Cable, Cat5, 70°C)
The 4-conductor shielded connecting cable (30m, Cat5, 70°C) is used to link the Temperature
Compensation Connection Box to a LAN/Ethernet device. It is a standardized cable, equipped with a
M12 4-pin connector type, D-coded, suited for industrial Ethernet with IP67 protection rate and a screw
retention feature on one side and a RJ45 connector type on the counter side.
TIP900
95
Rev. E1 Feb 2016
Advertisement
Table of Contents
