Troubleshooting; Overview; Critical Diagnostics Screens; Figure 31 - Local Display Fault Diagnostics Conditions - Honeywell SMV800 SmartLine User Manual

Multivariable transmitter

Hide thumbs Also See for SMV800 SmartLine:

Table of Contents

12 Troubleshooting

Troubleshooting involves responding to error messages, primarily displayed on local display. For

HART and DE transmitters, use the SmartLine Versatilis Modem and application software. For

Modbus refer to Honeywell Modbus configuration tool.

Error messages that may occur on the Transmitter's local display are self-explanatory and intuitive.

However, this section covers the diagnostic messages that indicate critical conditions. Other than the

critical conditions, additional detail is not provided. If you require assistance, contact your distributor

or Honeywell Technical Support. DE messages are covered in SCT3000 Guide (34-ST-10-08) and

HART messages are covered in 34-SM-25-06, Modbus in 34-SM-25-09.

See References.

When a Critical Diagnostic is present in the Transmitter, the display will show one or more of the

screens pictured in Figure 31.

These screens will be inserted into the normal screen rotation and displayed between the user-defined

operator screens. A description of the diagnostic conditions is given in Table 29, along with

suggested actions for resolving the problem.

Figure 31 – Local Display Fault Diagnostics Conditions

SMV800 Transmitter User's Manual

Page 72

Revision 10

Table of Contents

Smv800