Omron F3SJ-A P 01TS Series User Manual page 47

 Ref.: Minimum Wiring Required to Check the Operation of the F3SJ When Using the
Muting Function
(Wiring that does not use the external device monitoring function)
M1 *1 *2
B1 A1
*1 * 1
3 * * 3
A1 : Contact by muting sensor A1
B1 : Contact by muting sensor B1
M1 : Muting lamp
*1 When the muting function's operation check is not performed, it can work if this is open.
*2 Connect either the emitter or receiver to the muting lamp.
*3 Two-wire type sensor cannot be used.
(Grey) Communication line (+)
(Pink) Communication line (-)
System Configuration and Functions
+24V DC
0V
Power
supply
E
F3SJ-A
29
User's Manual