Omron F3SJ-A P 01TS Series User Manual page 142

Appendix
Control unit
Appearance
Control unit
Appearance
Control unit
Appearance
Control unit
Appearance
F3SJ-A
124
User's Manual
Model name Output
F3SX-N-
Relay, 2a+1b contact
(expandable)
F3SX-E- Solid-state output
(DC solid-state
safety output X 2,
Auxiliary output X
3)
Model name Output
Relay, 3a+1b contact - F39-JDA cable with connector on one
G9SA-301
Model name Output
G9SA-300-SC Relay, 3a contact
Model name Output
G9SB-301-B Auto reset, 3a+1b
contact
Manual reset,
G9SB-301-D
3a+1b contact
Auto reset, 2a
G9SB-200-B
contact
G9SB-200-D Manual reset, 2a
contact
Note
- A door switch, two-hand control switch,
single beam, or relay unit can be added to
the F3SX.
- F3SJ with PNP output can be connected.
- Can be used as a muting system if an F39-
JDA cable with connectors at both ends is
used.
- Various settings can be changed and input/
output terminals can be monitored using the
setting support software for F3SX.
Note
end is required.
- F3SJ with PNP output can be connected.
- Type with 5a+1b contact is also available.
Note
- One set of F39-JCC cables with
connectors on both ends is required.
- When extending the cable length, use 1 set
of F39-JCC and multiple sets of F39-
JDB.
- F3SJ with PNP output can be connected.
- Cannot be used as a muting system.
Note
- F39-JDA cable with connector on one
end is required.
- F3SJ with PNP output can be connected.
- The thickness for 3a+1b contact type
output is 25 mm.
- The thickness for 2a contact type output is
17.5 mm.