Programmable Key - Fortinet FortiFone FON 80 Series User Manual

Configuration overview
Connecting a Bluetooth headset
1. Go to Setting > Accessory > Bluetooth Headset.
2. Ensure Bluetooth is set to Enabled.
3. Press the Scan soft key.
4. Select the discovered Bluetooth device and press the Pair soft key.
Disconnecting a Bluetooth headset
1. Go to Setting > Accessory > Bluetooth Headset.
2. Select the connected Bluetooth device.
3. Press the Disconnect soft key.

Programmable key

Setting > Programmable Key allows you to configure the programmable keys that are on both sides of the screen using
the following settings:
Item
Programmable Key
Type (when using the FortiVoice
phone system)
FortiFone FON-x80/x80B Series 3.0.19 User Guide
Fortinet Inc.
The FON-480 and FON-580 phones can support a Bluetooth headset without the addition of a
CSR Bluetooth USB dongle.
To use a Bluetooth headset with a FON-380 phone, you must connect a CSR Bluetooth USB
dongle.
The FON-280B, FON-380B, and FON-480B phones do not currently support Bluetooth with a
dongle.
For more details, see Appendix A: Supported Bluetooth headsets and dongles on page
Description
Select the programmable key to configure.
When your extension is using the FortiVoice phone system (not FortiVoice
Cloud), select the action to take when the key is pressed:
None: Nothing will happen when the key is pressed.
l
Park: Places the call into the first available call park slot.
l
Speed Dial: Allows you to quickly place a call to an extension or a phone
l
number.
Call Forward: Opens the Call Forward settings to allow you to enable or
l
disable this function and enter the phone number to forward the calls to.
Intercom: Activates an intercom call.
l
Record: Allows you to record a phone call.
l
Line: Shows the status of active calls on the phone.
l
Twinning: Enables or disables the function which allows an external phone to
l
ring along with your office phone, so you can answer the call at either phone.
DTMF: When you are on a call and you press the DTMF key, the system dials
l
the configured DTMF digits.
Shared Line Appearance: Allows you to perform the following actions for a
l
48.
24