Oxymat 7 - Siemens SIPROCESS GA700 Compact Operating Instructions

Technical data
7.1 General technical specifications
Note
Correct fastening of the cable glands
Fasten the cable glands as follows:
• M16 x 1.5 clamping range 5 to 10 mm (0.2" .. 0.39") made of plastic, counter nut and cap nut
(clamp cables or plugs) with a torque of 3.0 Nm.
• M20 x 1.5 clamping range 10 to 14 mm (0.4" .. 0.55") made of plastic, counter nut and cap
nut with a torque of 4.5 Nm.
• M16 x 1.5 clamping range 6 to 10 mm (0.2" .. 0.39") made of metal, counter nut and cap nut
with a torque of 6.5 Nm.
• M20 x 1.5 clamping range 10 to 14 mm (0.4" .. 0.55") made of metal, counter nut and cap
nut with a torque of 9.0 Nm.
To ensure tightness of cable glands, use cable diameters of:
• 5 mm .. 10 mm (0.2" .. 0.39") for cable glands M16x1.5
• 10 mm .. 14 mm (0.4" .. 0.55") for cable glands M20x1.5
7.1.3

OXYMAT 7

Table 7-10 OXYMAT 7: General technical data
General
Information on the smallest span
Max. power Warm-up phase
consumption
Weight (only module)
Max. EMC error during operation with one
and/or two OXYMAT 7 / ULTRAMAT 7 units
The high-temperature version of the analyzer module is not intended for installation in the rack unit.
1)
Table 7-11 OXYMAT 7: Gas inlet conditions
Gas inlet conditions
Sample gas pressure with internal pressure sensor
with external pressure sensor
Reference gas pressure
Pressure loss between sample gas inlet and sample gas
outlet
Permissible sample gas flow range
Sample gas temperature and humidity.
92
OXYMAT 7
See module nameplate or parameter sheet
≤ 60 W
< 5.5 kg
1.0% in accordance with EN 61326-1
-500 ... +1 500 hPa
-500 ... +2 000 hPa
2000 to 4000 hPa above the sample gas pressure
Max. permissible: 5000 hPa (abs.)
Only nitrogen is allowed with flammable gas as sample gas
< 100 hPa at 1 l/min
18 to 60 l/h (0.3 to 1 l/min)
Compact Operating Instructions, 06/2023, A5E35134047-AB
OXYMAT 7 high-temperature
≤ 120 W
< 7.5 kg
1)
SIPROCESS GA700 rack and wall mounted devices
1)