Note
When leaving bypass mode, the purging unit F870S returns to the same mode it was in
previously (pre-purging phase or purging phase).
B.1.1.2
Ex p safety equipment
Pneumatic and electric connections of the Ex p control system (example)
A
Ex p controller F870S
B
Ex power relay SR853
C
Ex interface relay SR852, 16-pin
D
Proportional valve
E
Pressure regulating valve for purg‐
ing gas with gauge
①
Power connection
②
Purging gas connection to the Ex p controller F870S, 12 mm (0.47") (outer diameter)
③
Purging gas inlet
④
Purging gas outlet
⑤
Purging gas connection from Ex p controller F870S, 12 mm (0.47") (outer diameter)
⑥
Purging gas connection; supply pressure 1000 hPa (rel.)
⑦
Connection from and to Ex interface relay SR852
⑧
Exhaust air outlet. If appropriate connection of a 1" line, max. length 20 m
Figure B-2
Gas path of the Ex p safety equipment, Gönnheimer Elektronik GmbH
Connection information
The supply pressure has to be sufficiently large (2.5 ... 5 bar).
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB
F
Power connection
G
Analyzer module 1 (AM1)
H
Analyzer module 2 (AM2)
I
Flame arrestors
J
Signal cable connection
Ex px safety equipment
B.1 Overview
109