Connecting The Wall-Mounted Device; Arrangement Of The Gas Connections In The Wall-Mounted Device; Overview - Siemens SIPROCESS GA700 Compact Operating Instructions

3. Place the guard bracket
is 2.5 Nm. (Ex-devices only)
4. Connect the device to the equipotential bonding
with spring washer to the threaded bolt M4.
4.7

Connecting the wall-mounted device

4.7.1

Arrangement of the gas connections in the wall-mounted device

4.7.1.1

Overview

Wall-mounted device with analyzer modules in all versions
With a wall-mounted device, the gas connections are located on the device bottom.
The following figure shows the bottom of the wall-mounted device with gas connections of
all versions of an OXYMAT 7 and an ULTRAMAT 7 as an example.
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB
⑤
over the IEC connector and screw it to the enclosure. The torque
4.7 Connecting the wall-mounted device
②
. To do this connect the ring cable lug
Connecting
51