Service and maintenance
6.3 Maintenance and repair work
Note
Minimum wait time after de-energizing is 10 minutes.
NOTICE
Penetration of moisture into the device
Damage to device.
• Make sure when carrying out cleaning and maintenance work that no moisture penetrates
6.2
Safety notes for hazardous areas
Dust layers above 5 mm
Risk of explosion in hazardous areas.
Device may overheat due to dust build up.
• Remove dust layers in excess of 5 mm.
6.3
Maintenance and repair work
Impermissible accessories and spare parts
Risk of explosion in areas subject to explosion hazard.
• Only use original accessories or original spare parts.
• Observe all relevant installation and safety instructions described in the instructions for the
Note
Usage of impermissible accessories and spare parts will cause loss of all specificized properties
and warranty claims.
82
the inside of the device.
WARNING
WARNING
device or enclosed with the accessory or spare part.
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB