Connecting
4.6 Connecting the rack-mounted device
4.6
Connecting the rack-mounted device
4.6.1
Arrangement of the gas connections in the rack-mounted device
With a rack-mounted device, the gas connections are located on the rear.
The following figure shows as an example the rear of the rack-mounted device with gas
connections of an OXYMAT 7 and a CALOMAT 7.
①
②
Figure 4-4
4.6.2
Connecting signal and Ethernet cables
Note
Connecting signal cables
Install the signal lines separately from the power lines.
48
Slot of analyzer module 1: OXYMAT 7
Gas connections:
1
2
3
4
Slot of analyzer module 2 CALOMAT 7
Gas connections:
1
2
3
4
Rack-mounted device: Gas connections using combined operation OXYMAT 7 / CALOMAT
7 as an example, device rear
Sample gas inlet
Sample gas outlet
not assigned
Reference gas inlet
Sample gas inlet
Sample gas outlet
not assigned
Not assigned
Compact Operating Instructions, 06/2023, A5E35134047-AB
SIPROCESS GA700 rack and wall mounted devices