5.4.1.2
Recommended test setup for the OXYMAT 7 high-temperature
Arrangement of gas connections in the OXYMAT 7 high-temperature in the wall-mounted device
The following figure shows the gas connections of a high-temperature OXYMAT 7:
1
Reference gas inlet
2
Sample gas inlet
3
Sample gas inlet
Test setup for leakage test with OXYMAT 7 high-temperature
To check for leaks, we recommend the following test setup:
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB
Commissioning
5.4 Checking gas paths for leaks
71