Troubleshooting The Heating Element, Rear Handle; Troubleshooting The Heating Element, Front Handle; Troubleshooting The Generator - Husqvarna 560XPG Workshop Manual

7.40.2 Troubleshooting the heating element, rear
handle
Connect the multimeter as outlined in Figure 7 and
measure the resistance in rear handle's heating
element. The multimeter reading should indicate
between 0.5 and 1.2 Ohm. Replace the heating
element if you get another reading.
7.40.1 Troubleshooting the heating element,
front handle
Connect the multimeter as outlined in Figure 8 and
measure the resistance in the front handle's heating
element. The multimeter reading should indicate
between 3 and 5 Ohm. Replace the front handle if
you get another reading.

7.39.1 Troubleshooting the generator

Connect the multimeter to the generator cable and a
properly cleaned cylinder as outlined in Figure 9.
The multimeter reading should indicate between 0.4
and 1.1 Ohm. Replace the generator if you get
another reading.
Fig 7
Fig 8
Fig 9
Repair Instructions
0.5 - 1.2
3 - 5
0.4 - 1.1
43
English -