General Instructions; Special Instructions - Husqvarna 560XPG Workshop Manual

Hide thumbs Also See for 560XPG:
Table of Contents

Advertisement

Introduction and safety instructions

1.8 General Instructions

The workshop where the chain saw is to be repaired
must be equipped with safety equipment in
accordance with local regulations.
No one may repair the chain saw unless they have
read and understood the content of this Workshop
Manual.
This workshop manual contains the following
warning boxes in relevant places.
WARNING!
The warning box warns of the risk of
personal injury if the instructions are
not followed.
NOTE!
This box warns of material damage if the
instructions are not followed.
4
- English

1.9 Special Instructions

The fuel used in the chain saw has the following
hazardous properties:
• The fluid and its vapour are poisonous.
• Can cause eye and skin irritation.
• Can cause breathing problems.
• Is highly inflammable.
When using compressed air, do not direct the jet
towards your body. Air can penetrate into the blood
stream, which can endanger life.
Wear protective earplugs or earmuffs when test
running.
After test running, do not touch the muffler until it
has cooled down. Risk of burns. Use protective
gloves when working with the muffler.
Do not start the chain saw unless the bar, chain and
clutch cover (chain brake) are fitted, otherwise the
clutch may loosen and cause personal injury.
Insufficient chain lubrication can result in chain
breakage, which can cause serious or even life-
threatening injury.
Exercise care to ensure the starter spring does not
fly out and cause personal injury. Wear protective
glasses. If the spring tension is activated on the
starter pulley when it is to be taken up, the spring
can fly out and cause personal injury.
Check that the brake is applied when removing the
pressure spring on the chain brake. Otherwise the
pressure spring can fly out and cause personal
injury.
After repairing, check the chain brake, see
"Assembling chain brake \ Function check".
Keep in mind the fire risk. The chain saw may emit
sparks, which cause ignition.
Check the chain catcher and replace it if it is
damaged.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

556560xp555562xp562xpg

Table of Contents