Husqvarna 560XPG Workshop Manual page 37

1. Position the guide taps on the air filter holder in
the rubber grommets, G. See figure 48.
2. Hook on the throttle cable, D. See figure 46.
3. Fasten the return hose B and secure it in its
mountings on the air filter holder.
4. Attach the pressure hose A, with the short hose
on the short plastic plug on the fuel pump. See
figure 49.
5. Hook it on the left side and then the right side of
the carburettor in the rubber mounting. Then
screw the carburettor in place. See figure 48.
6. Fit the air filter.
Fig 47
Fig 48
Fig 49
Repair Instructions
37
English -