Fujitsu AIRSTAGE J-II Design & Technical Manual page 484

Floor installation
z „
Use the 4 screws to fasten the unit to the floor.
Screw
(M4 x 20)
Wall mounted installation
z „
(1) Remove the 2 screws (M4x10) and replace them with the hanger.
(2) Use the 4 screws (M4x20) to fasten the unit to the wall.
Screw
(M4 x 10)
CONNECT THE PIPES
„ „
Connect EV kit to liquid pipe of compact wall mounted (EEV external model) indoor unit.
Indoor unit side
Pipe size
Outdoor unit side
Use a toruque wrench to tighten the flare nut.
Screw
(M4 x 20)
Screw
(M4 x 10)
ø 6.35mm
Flare connection
ø 6.35mm
Holding spanner
Body side
90 o
Torque
wrench
- (06 - 42) -
Wall
Pipe Tightening torque
ø 6.35
16.0 to 18.0 N•m
(1/4")