Fujitsu AIRSTAGE J-II Design & Technical Manual page 389

FUNCTIONS
„ „
16
1
3
2
4
5
11
13
Display panel
17
18
19
20
*1 : "AUTO " is not available for a heat pump model unless it is set up as an administrative indoor
unit.
*2 : "FAN " is not available for a heat pump model.
*3 : "HEAT " is not available for a cooling only model.
1 OPERATION MODE button
Selects the operating mode (AUTO, HEAT, FAN, COOL, DRY).
/Start / end R.C. custom code change. (Max 4 types)
2 Economy button
3 Set temp. button ( ▲ / ▼ )
Set remote controller custom code buttons
Sets the indoor temp./ Sets R.C. custom code.
4 Filter reset button
5 Sleep button
Pressed to select sleep timer.
6 Fan button
Selects the fan speed (AUTO, LOW, MED, HIGH).
6
7 START/STOP button
7
Pressed to start and stop operation.
8
8 Set button (Vertical)
Vertical airflow direction set button.
9
9 Set button (Horizontal)
Horizontal airflow direction set button.
10
10 Swing button
Swing airflow button.
11 Timer mode button
14
Pressed to select the timer mode. (OFF TIMER, ON TIMER,
PROGRAM TIMER, TIMER RESET)
12
12 Timer set ( + / - ) button
15
Sets the current time and on-off time.
13 Clock adjust button
Sets the current time.
14 Reset button
Used when replacing batteries.
15 Test run button
Used when testing the air conditioner after installation.
16 Signal transmitter
17 Temperature set indicator
18 Economy indicator
21
19 Operating mode indicator
20 Sleep indicator
21 Transmit indicator
22
22 Fan speed indicator
23 Swing indicator
23
24 Timer mode indicator
24
25 Clock indicator
25
- (05 - 85) -