Fagor IO-HOB-1196 Instruction Manual page 50

OPERATION
The residual heat indicator
Once a cooking zone is switched off, „H" is displayed on the relevant cooking zone's display
to warn that the „cooking zone is still hot!".
Do not touch the cooking zone
at this time owing to the risk of
burns from residual heat, and do
not place any object on it which is
sensitive to heat!
When the residual heat indicator goes out,
cooking zone can be touched, however keep
in mind that it may still be warmer than ambient
temperature.
When there is no power, the residu-
al heat indicator does not light up.
Limiting the operating time
In order to increase efficiency, the induction
hob is fitted with a operating time limiter for
each of the cooking zones. The maximum
operating time is set according to the last heat
setting selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched off and the
residual heat indicator is activated. However,
you can switch on and operate individual
cooking zones at any time in accordance with
the operating instructions.
50
Cooking heat Maximum
setting operating time
(hours)
1
2
3
4
5
6
7
8
9
P
2
6,0
6,0
5,0
5,0
4,0
1,5
1,5
1,5
1,5
0,17