Fagor IO-HOB-1196 Instruction Manual page 52

Table of Contents

Advertisement

Available languages

Available languages

OPERATION
Timer
Timer function makes cooking easier by making it possible to set cook time. It can also be
used as a Kitchen Timer.
Setting the Timer
Timer function allows the cooking zone to be switched off after the set time has elapsed. The
timer function can only be set when a cooking zone is operating (heat setting is greater
than „0"). The timer function can be set independently for all individual cooking zones. Timer
countdown can be set from 1 to 99 minutes.
To set the timer:
● select a cooking zone by touching cooking zone selection sensor field (3) and select the
desired heat setting from 1 to 9 by sliding your finger across the heat setting selection sensor
field (2). The display will show all the selected heat settings from 1 to 9 and a decimal point
(for example "4.").
● then, during the next 10 seconds, touch the Timer selection sensor field (4). „0 -" will be
shown on the Timer display (4) and the appropriate Timer activation pilot light (5) will light
up to indicate activation of the Timer function for the relevant cooking zone.
● Now, select the desired Timer setting by sliding your finger across the setting selection
sensor field (2). The second digit is set first and the first digit is set next. Once the second
digit is set, it will be shown on the display and the timer will automatically allow you to set
the first digit by showing the dash „-" symbol (for example „- 6"). If no setting for the first digit
is chosen within 10 seconds, the dash „-" symbol will be replaced with „0" (for example „0
6"). The countdown starts when the Timer activation pilot light (5) stops flashing.
Kitchen timer is reset when the timer function is activated.
Changing Timer (cook time) setting
Programmed Timer setting can be changed at any time. To change the programmed Timer
setting, select a cooking zone by touching the cooking zone selection sensor field (3), and
then touch the Timer selection sensor field (4).
Checking Timer countdown
To check progress of Timer countdown at any time, touch the cooking zone selection sensor
field (3).
52

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

8508549

Table of Contents